Yamaha- RM-CR Adecia RM Audio Processor w/USB, analog I/O, SIP, Dante, Bluetooth- Each

Rs. 172,200.00

RM-CR Remote Conference Processor
Signal processor at the heart of the ADECIA
  • Standard network audio support for "Dante"; all compatible devices can be connected with single network cable
  • Automatically recognizes connected devices on the same network for audio routing
  • Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
  • Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
  • Equipped with various Input/Output connections such as USB, VoIP,, analog, and Bluetooth

Product Specs

Dimensions 215 (W) x 44 (H) x 260 (D) mm
Weight 1.6kg
Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48V
Maximum Power Consumption 15.0W
In Operation Temp/Humidity 0°C - 40°C / 30% - 90% (no condensation)
Storage Temperature/Humidity -20°C - 60°C / 20% - 90% (no condensation)
Indicator Power indicator, Status indicator, Bluetooth indicator, Network port indicator x 3
Accessories Installation manual, USB Cable (A-B) 5m (16.4ft), USB Cable (A-microB) 1m (3.3ft), Rubber foot x 4, Access panel
Options Rack Mount Kit RM-MTL, Table Mount Kit RM-MRK
Input Terminal MIC IN 1/2 AUX IN L/R
Input Level Nominal MIC IN 1/2 : -46dBu / AUX IN L/R :-14dBv
Input Level Max. before Clip MIC IN 1/2: -26dBu / AUX IN L/R: +6dBV
Connector MIC IN 1/2: XLR-3-31 (Balanced) AUX IN L/R: RCA Pin
Output Terminal AUX OUT L/R SP OUT L/R
Source Impedance 1kΩ
For Use with Nominal 10kΩ
Output Level Nominal: -14dVb Max. before Clip: +6dVb
Connector RCA Pin
Audio I/O Dante 16in/16out
Audio I/O USB USB2.0, Audio Class 1.0, Input: 2ch, Output: 2ch @48kHz
Audio I/O Microphone Input XLR Balanced, Input: 2ch
Audio I/O Aux RCA Unbalanced (Line Level), Input: 2ch, Output: 2ch
Audio I/O Speaker Out RCA Unbalanced (Line Level), Output: 2ch
Audio I/O Bluetooth Version 4.2 Supported Profiles: HFP (1.6), A2DP, AVRCP Supported Codec: CVSD, SBC, mSBC Wireless Output: Class2 Maximum Communication Distance: 10m (32.8ft) (no obstacles) Radio Frequency (Operational Frequency): 2,402MHz - 2,480MHz Maximum Output Power (EIRP): 4.0dBm (2.5mW)
Audio I/O SIP Call Handling: Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Redial, Call timer, Call ID, Voice mail notifications (switch configured) Call Bridging: Supports bridging SIP, USB, BT and AUX calls. Join, Split, Hold, Resume, 5+1 lines: up to 2 SIP calls, 1 USB call, 1 Bluetooth call, 1 AUX, Plus the user Codecs: G.711, G.722HD, G.729ab, G.726 DTMF Support: RTP event, SIP in-band, SIP info package Security: SRTP support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)
Sampling Rate 48kHz
Bit Depth 24bit
Latency 8ms (Dante In to USB Out, includes signal processing)
Frequency Response 20Hz - 20kHz
Ether1 Dante, Remote Control, Web UI, PoE+
Ether2/Ether3 Corporate Network, Remote Control, SIP, Web UI
USB Network (Front) USB2.0, Network Class, Web UI, Fixed IP
Cable Requirements Ethernet1/2/3: CAT5e or higher (STP) USB Network : USB Cable (A-microB)


Country of Origin: MALAYSIA

You recently viewed

Clear recently viewed