Ecler CUBE5 5" 2-Way 32 WRMS WiSpeak Wireless Powered Desktop + Raimount Speaker - Each

Rs. 105,900.00

  • WiSpeak CCUBE is a self-powered 5" loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an installation system which is compatible with ceiling light rails. Alternatively, wall mount or desktop installation is as well possible by means of the included accessories.


  • Loudspeaker cabinet style self-powered WiSpeak receiver, including 5” woofer and 1” tweeter drivers
  • Lighting rail mount included
  • Surface / wall mount accessory included
  • Universal, internal power supply, taking mains AC from the lighting rail bracket (100-240VAC 50-60Hz) or from the external AC wire (both included)
  • 1 x WiSpeak wireless audio signal received, from the transmitter it is paired to
  • 1 x AUX OUT analogue signal available (a copy of the received WiSpeak signal). It can be used for linking the unit to another WiSpeak transmitter to extend the network or to external audio devices, such as amplifiers, mixers or subwoofer units
  • Back panel UNPAIR control and front panel LED indicators
  • Available in white (RAL 9003) and black (RAL 9005)



  • Frequency band  U-NII 5.1 – 5.8GHz (supported worldwide) Up to 24 non-overlapping RF channels DFS support
  • Coverage range Up to 12m from a TX to any paired RX, direct line of sight
  • Audio channels  WiSpeak CH1 / CH2
  • Audio transmission  24bit uncompressed, 48kHz SR
  • Digital Audio Sample size  24 bits
  • Digital Audio Sampling rate  48 kHz
  • Digital Audio Frequency Response  20Hz – 20kHz (-0.1dB)
  • Digital Audio converters  DAC Resolution: 24 bit DAC Dynaimic range: 100dB
  • Latency  From TX IN to RX AUX OUT <6ms From TX IN to RX Speaker <6ms
  • Jitter among receivers ±1us
  • Pairing time  Up to 120s
  • Reconnection time  Up to 120s


  • Effective Freq. Range   70 - 20kHz
  • Coverage angle   150x150 (HxV)
  • Sensitivity   83 dB (1W/1m)
  • Maximum SPL   98 dB continuous / 104 dB peak


  • Ways   2 ways
  • Low frequency driver   5" woofer
  • High frequency driver   1" tweeter
  • Nominal impedance   8Ω 


  • Power   32 W RMS / 128 W Peak
  • Audio inputs   CH1 / CH2: Digital, Mono, RF Wireless Audio
  • Audio outputs   Internal Loudspeaker: Analog, Mono, Self powered AUX OUT: Analog, Mono, Balanced, Euroblock
  • THD + Noise  <0.15% @ 1kHz Full power
  • Signal Noise Ratio >95dB at RX AUX OUT
  • Input sensitivity  0dBV / 10kΩ


  • Power supply Universal, internal power supply
  • AC mains requirement  100-240VAC @ 50-60Hz
  • AC mains connector  From lighting rail bracket, or standard 2-pin AC plug
  • Power consumption   15 W (rated)


  • Volume control via WiSpeak grip app.
  • Other controls  SOLO: via WiSpeak grip app
  • ID TEST SIGNAL: via WiSpeak grip app  PAIR / UNPAIR: via WiSpeak grip app and Panel button
  • LED Indicators  WiS and STR LEDs
  • Programing and control  via WiSpeak grip app.


  • Connection type Standard 2-pin connector for VAC
  • Installation options Surface, desktop, shelf, table, etc. Or in a ceiling light rail.
  • Certifications  FCC, EMC, CB
  • Enclosure material  ABS cabinet
  • Grille material  Aluminium
  • Mounting system  Lighting rail mount compatible
  • Pan and tilt wall-mount  Swivel (pan & tilt)
  • Rail fixing system  4 wire 3 circuit track system
  • Compatible rail systems  Global Track Pro or compatibles
  • Operating temperature  Min: -10°C ; 14°F
  • Max: 40°C ; 104°F   Operating humidity <85% HR
  • Storage temperature Min: -10°C ; 14°F  Max: 40°C ; 104°F
  • Storage humidity  <90% HR
  • Included accessories  Lighting rail mount, Surface / wall mount
  • Finished colour   White (RAL 9003) or black (RAL 9005)
  • Dimensions 173 x 180 x 181 mm / 6.81 x 7.09 x 7.13 in. (WxHxD)
  • Weight  2.1 kg / 4.6 lb
  • Pieces per box  1 unit
  • Shipping dimensions  320 x 260 x 220 mm / 12.6 x 10.24 x 8.66 in. (WxHxD)
  • Shipping weight  3.2 kg / 7.05 lb


Country of Origin: SPAIN

You recently viewed

Clear recently viewed