QSC E110 1200W 10 " Passive Speaker 2-way - Each

Rs. 70,000.00

The E110 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s Directivity Matched Transition® (DMT) design with a wide 85° coverage. When used as a stage monitor, the E110 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features
  • High output, professional quality sound with 300 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
                       - For PLD/CXD visit Amplifier Navigator Software
                       - For GXD visit the GXD Firmware Updater
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Suitable for main PA and stage monitor
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket
Tech Specs
  • Powered: No
  • Power Configuration: 2-way
  • LF Driver Size: 1 x 10" die-cast aluminum woofer with 2.5" voice-coil
  • HF Driver Size: 1 x 1" HF compression driver, 1.75" voice-coil
  • Impedance: 8 ohms
  • Power Rating: 300W Continuous
  • Inputs: 2 x speakON (NL4), 1 x barrier strip
  • Total Power: 1200W Peak
  • Frequency Range: 50Hz-20kHz (-10 dB)
  • Frequency Response: 68Hz-20kHz (-6 dB)
  • Crossover Frequency: 1.8kHz, full-range only
  • Horizontal Coverage Angle: 85 Degrees (conical DMT)
  • Maximum Peak SPL: 126 dB SPL @ 1m
  • Enclosure Material: Plywood with black texture paint finish
  • Mounting Options: Pole Mount with 1.37" socket, Floor Wedge, 4 x M8 Fly Points
  • Height: 22"
  • Width: 13"
  • Depth: 13"
  • Weight: 44 lbs.

You recently viewed

Clear recently viewed