HECO Install Basic INC 262 In-Ceiling Speaker - Pair
HECO Install Basic INC 262
Key Features
- In-wall/in-ceiling loudspeaker
- Special clamping mechanism for easy installation
- Moisture-proof speaker system, suitable for use in humid rooms (bathroom)
- Double tweeter, double voice-coil for woofer, Stereo/Mono mode
In-ceiling speaker, 2x2-way configuration
HECO´s INC 262 is the model for special applications in the Install Basic series. The speaker is closely related to the INC 62, however, unlike its sister model it features a dual voice coil for the bass-midrange and two 19 mm fabric dome tweeters. This special configuration means the speaker can either be operated with a mono or stereo signal. The desired operating mode is set, just like the tweeter level, via a switch on the crossover. Its coaxial driver configuration makes it particularly suitable for ceiling installation. The grille, which can be removed for installation purposes, provides a seamless transition to the discreet mounting frame.
HIGH QUALITY TECHNOLOGY FOR SMOOTH OPERATION
The textured polypropylene cone, which has been specially developed for built-in speaker systems, ensures excellent dynamic capabilities in the low frequency range in combination with the long-throw rubber surround. The INC 62 and INC 82 models are equipped with a specially coated 25 mm soft dome fabric tweeter for the treble range, while the INC 262 features two 19 mm fabric domes for a particularly homogeneous sound pattern. The tweeters are positioned centrally in front of the bass-midrange drivers (in a coaxial configuration) to ensure the sound is distributed evenly in all directions. Crossovers with high quality components ensure a clean, low-loss distribution of the signals. All components are also suitable for use in wet rooms, which means the speakers in the Install Basic series can be used in both bathrooms and swimming pool environments.
EXTENSIVE ADAPTABILITY FOR AN OPTIMUM SOUND
The dome tweeters used by the INC 62 and INC 82 can be pivoted by 35° in all directions to ensure a fully-fledged sound pattern in any setup. The bass-midrange driver of the INC 262 is equipped with a double voice coil, which enables the speaker to be operated in both a mono and stereo mode. In addition, the mid-range and treble level can also be individually adjusted for all systems in 3 stages. This enables the sound generated by the speakers to be perfectly adapted to any installation.
Specification
PRINCIPLE |
Built-in loudspeakers |
SENSITIVITY (2.8V/1M) |
90 dB |
EQUIPMENT |
25 mm tweeter |
160 mm woofer |
|
IMPEDANCE |
2 x 4 Ohm |
CROSSOVER FREQUENCIES |
3.800 Hz |
POWER HANDLING (RMS/MAX) |
80 / 150 watts |
MOUNTING DIMENSIONS (Ø) |
193 mm |
OUTER DIMENSIONS Ø |
228 mm |
MOUNTING DEPTH |
75 mm |
FREQUENCY RESPONSE |
36 – 28.000 Hz |
RECOMMENDED AMPLIFIER OUTPUT |
30 - 160 watts |