Bose POWERSPACE P4300 Power Amplifier 4 x 300W Low-/High-impedance with DSP, Auto-standby, and Opti-voice Paging - Each
Rs. 331,073.00
Bose PowerSpace 4300+ Power Amplifier Features:
- 300 watts per channel, with I-Share outputs that combine the current of two channels to deliver twice the power level
- Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
- Built-in DSP including SmartBass processing, Bose loudspeaker EQs (plus input and area EQs), level controls, delays, limiters, and more
- PowerSpace configuration utility with integrated webserver and intuitive browser-based UI greatly simplifies setup, plus provides real-time control and signal/thermal monitoring
- Opti-voice paging provides non-jarring transitions between announcements and music
- Dedicated input for 600-ohm telephone or mic paging
- Independent 600-ohm on-hold music and line-level aux outputs
- NO/NC mute connection
- Auto-standby mode saves power when audio signal falls below a set threshold
- Optional ControlCenter CC-1, CC-2, and CC-3 analog zone controllers (sold separately) provide easy volume control and source selection
- Rack mountable: 1RU
- Watts/Side @ 8 ohms: 300W
- Watts/Side @ 4 ohms: 300W
- 70V/100V Output: 300W
- Inputs: 2 x 6-pin Euroblock, 1 x RJ45
- Outputs: 4 x Binding Post, 1 x RJ45
- Cooling System: Variable Speed Fan
- DSP: No
- Filters: 50 Hz high-pass filter
- Frequency Response: 20Hz-20kHz
- Overload Protection: Power limiter, temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
- Rack Spaces: 1U
- Power Source: Standard IEC AC plug
- Height: 1.7"
- Depth: 16.5"
- Width: 19"
- Weight: 14.6 lbs.
