POPE MA‐7200, 2*1500 W RMS @ 4Ω 2U Power Amplifier / Analog Inputs
Rs. 81,125.00
MA Series
Description
The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.
Description
The POPE Professional® MA-7200 is 2U and MA-8200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.
Product Description
- Audio Power Amplifiers is 2U and MA-7200 is 3U, high performance power amplifier designed to meet the most stringent needs of professional use in concert touring, high quality sound reinforcement and professional fixed installations. This amplifier is fully comparable with the other Professional Series amplifiers.
- Enhanced protection
- Precise power amp output
- 4 forced air cooling fans system
- 2mm thick "In-One" rugged steel chassis - durable, strong, and easy for maintenance
- Advanced power supply technology
- Class H architecture Automatic gain control (AGC) circuit, decrease distortion
- 2-channel Stereo, bridge mono or parallel connection.
- Delivery Lead Time : 90 Days
- The MA Series Amplifiers can use stadium, dance hall, concerts and touring live performances.
Product Specification
| Model | MA-7200 | |
| Number of channels | 2 | |
| Total output all channels driven | 3000 W @ 4 ohms | |
| Max. Output Power | 4 ohms | 8 ohms |
| Per channel watts | 1500 W | 950 W |
| Bridge Mono | 3000 W | 1900 W |
| Frequency Response | ±0.1 dB from 20 Hz to 20 kHz at 1 watt | |
| Phase Response | ±10 degrees from 10 Hz to 20 kHz at 1 watt | |
| THD | 0.05% | |
| Intermodulation Distortion (IMD) |
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) | |
| Signal-to-Noise Ratio | >105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. | |
| CMRR (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB | |
| Crosstalk | > 80 dB (below rated power, 20 Hz to 1 kHz) | |
| Slew Rate | 80V/usec | |
| Damping Factor | >2,000 from 10 Hz to 400 Hz | |
| Input Impedance (Nominal) | 20KΩ Balanced | |
| Signal Input | Two balanced 3-pin female XLR connectors | |
| Signal Output | Parallel two balanced 3-pin male XLR connectors | |
| Input Sensitivity gain | 0.775 / 1 / 1.44 Volt | |
| Output Circuitry | Class H | |
| Output Connector | Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector | |
| Connectors | Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector | |
| LED Indicator | Power, Signal, Protect, Clip | |
| Protection | Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients | |
| Cooling System | Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow | |
| Construction | Steel chassis with durable black powder coat finish | |
| Power Supply | Toroidal Transformer | |
| Power Range | 200 - 240VAC @ 50Hz | |
| Mains | Powercord | |
| Input Power (Watts) |
1600W
|
|
| Dimension (W x D x H) |
482mm × 443.5mm × 88.8mm
|
|
| Size |
2U
|
|
| Net Weight |
22.5 Kg (49.6 lbs)
|
|
| Gross Weight |
26.2 Kg (57.7 lbs)
|
