Ecler DN44BOB 4x4 Dante™ Digital Audio Interface Digital Matrixes
Rs. 235,900.00
Description
DIGITAL ENGINE
- DN44BOB is a 4 inputs and 4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals. It includes 4 GPI control ports (0-10VDC) and 4 GPO control ports (NO/NC relays). Can be used together with EclerNet DANTE ready products or as a stand-alone DANTE interface, together with any audio device including analogue audio inputs and/or outputs.
- Ethernet, interface, DANTE audio and EclerNet compatible
- 4 MIC/LINE balanced inputs, with Phantom Power and 3 sensitivity levels, Euroblock connector
- 4 balanced LINE Outputs, Euroblock connector
- 4 GPI ports (0-10VDC)
- 4 GPO ports, NO / NC
- Rack-mount kit included: 1UHRMKIT + PUM3- Rackmount accessories to mount 2 half- width RU devices in 1 standard width RU space or to mount 1 half- width RU device in 1 standard width RU space
- Retail Corporate Sports & Wellness Hospitality
DIGITAL ENGINE
- Processor 32 bit, 44.1/ 48 / 88.2 / 96 kHz
- Sampling rate 44.1/ 48 / 88.2 / 96 kHz - TBC
- Resolution 24 bit AKM
- Latency 1ms (fs = 48kHz)
- Frequency response 5Hz to 24kHz (-3dB)
- Dynamic range AD:110dB; DA: 115dB
- Number of input ports 4, MIC/LINE
- Connection type Phoenix connector (Symmetrical)
- Input sensitivity -50dBV to +10dBV in 0.5dB step
- Input impedanc Balanced, >4kΩ
- Max input level +27dBV = +30dBu
- THD + Noise THD+Noise @ 1kHz, 0dBV input (line) <0.004% THD+Noise @ 1kHz, -40dBV input (mic.) <0.008%
- CMRR 65dB typ.
- Phantom power +18VDC, 5mA max. software switched
- Number of output ports 4, Line
- Connection type Phoenix connector (Symmetrical)
- Max output level +18dBV = +21dBu
- Crosstalk Better than 90dB (100dB typ.)
- Protocols Dante™ / AES67
- Number of digital input ports 4
- Number of digital output ports 4
- Interfaces 1 x RJ45
- Ethernet 1, RJ-45. Ethernet Base-Tx 10/100Mb; Auto X-Over CAT5 up to 100m
- Programing and control EclerNet manager (software) from v3.05r2 version
- Digital remote controls 8, Euroblock connector
- GPIs 4, from 0 to 10VDC or TTL level
- GPOs 4, 3 poles isolated relay; 1A, 48 VDC max
- Power supply DC supply ± 24 VDC
- AC mains requirement 100-240VAC + External PSU 24VDC
- AC mains connector TBC
- Power consumption 6.5 W
- Dimensions 241 x 44 x 152 mm / 9.49 x 1.73 x 5.98 in. (WxHxD)
- Weight 1.1 kg / 2.43 lb
- Shipping dimensions 220 x 50 x 410 mm / 8.66 x 1.97 x 16.14 in. (WxHxD)
- Shipping weight 1.4 kg / 3.09 lb
