Ecler NXA4-400 4x400 WRMS DSP Class D Silent TP-NET EclerNet Digital Amplifiers

Rs. 455,900.00

Description
  • NXA4-400 is a 4 channel x 400W, self-powered digital manager that stays halfway between a digital matrix and a multichannel amplifier. An "all-in-one" digital audio device that becomes a complete audio solution, including several remote control options and a long list of smart features.
Features
  • 4 analogue audio inputs x 4 powered audio outputs
  • Class D amplifiers (eco friendly)
  • Auto stand-by function (eco friendly)
  • 100% silent (fanless convection cooling system)
  • Health self-test mode function, with FAULT RELAY (for an external redundancy system)
  • Integrated anti-clip system
  • Integrated DSP processor.
  • Inputs mixer independent per channel (all inputs available)
  • VOLUME, MUTE, SOLO, PHASE INVERSION, MAX. VOL limit and MIN.VOL limit, LP and HP Crossover filters, parametric EQ filters bank, Ducker, Delay, Compressor and more settings configurable per channel.
  • Ethernet interface, compatible with EclerNet Manager platform and UCP remote control system
  • RS-232 Interface
  • TP-NET third-party remote control (compatible with CRESTRON®, AMX®, RTI®, VITY®, etc.)
Applications
  • Retail Education Corporate Leisure

SPECIFICATIONS 
INPUTS
  • Number of inputs    4 analogue input channels
  • Analogue input connection type   IN1-4: 3-pin Euroblock   
  • Input configuration   Digital matrix 4 in x 4 powered audio out
AMPLIFIED OUTPUTS
  • Number of amplified outputs    4
  • Amplified output connection type   2-pin Euroblock
  • Output configuration    SINGLE (independent), PARALLEL or BRIDGED
OUTPUT POWER
  • Max output power @ 8Ω   205 WRMS
  • Max output power @ 4Ω   330 WRMS
  • Max output power @ 8Ω bridge mode   760 WRMS
SIGNAL
  • Voltage gain   +26 / +32 dB
  • Input impedance   Balanced, 22kΩ
  • Max input level    +18 dBV = +21dBu
  • Frequency response    10Hz – 25kHz
  • THD + Noise   <0.08%
  • SNR   >100dB (110dB typ.) - TBC
  • Crosstalk    >75 dB
  • CMRR   >50 dB
  • Damping factor   >600
CONNECTIVITY
  • Ethernet   Ethernet Base-Tx 10/100Mb, Auto X-Over, Cat5
  • Programing and control   EclerNet Manager control application
PHYSICAL
  • Dimensions   482.6 x 88 x 373 mm / 19 x 3.46 x 14.69 in. (WxHxD) (Handles and knobs excluded)
  • Weight    15.6 kg / 34.39 lb

You recently viewed

Clear recently viewed