Dynacord PM 502 8 Input Channels Compact Powered Mixer - Each

Key Features:

• 8 input channels with 5 Mic/Line- and 3 Stereo-Line inputs
• 2 x 600 Watts max output power, 100V Direct Drive Option
• High-Quality FX processors, 32 editable presets
• USB interface, file player for MP3 and WAV files
• 3 Master outputs with 7-band EQ each and delay for Master B

SPECIFICATIONS

• Channels (mono + stereo) 5 + 3
• Microphone inputs 5 x XLR/Jack socket
• Auxiliaries (FX, AUX) 1 Post, 1 Pre

Max. single channel output power, dynamic headroom, IHF-A

• into 4 Ω 640 W
• into 8 Ω 350 W

Max. dual channel output power, dynamic headroom, IHF-A

•  into 4 Ω 2 x 600 W
•  into 8 Ω 2 x 340 W

Max. single channel output power, continuous, 1 kHz, THD = 1%

•  into 4 Ω 500 W
•  into 8 Ω 280 W

Max. midband output power, 1 kHz, THD = 1%, dual channel

•  into 4 Ω 2 x 450 W
•  into 8 Ω 2 x 270 W

Rated output power, 20-20000 Hz, THD < 0.5%, one channel loaded

•  into 4 Ω 400 W
•  into 8 Ω 240 W

Max. output power, Direct Drive mode (bridge configuration),
continuous, 1 kHz, THD = 1%

•  into 12 Ω 680 W

Max. output voltage, power amplifier, 1 kHz, no load

•  Dual channel mode 52 Vrms
•  Direct Drive mode 100 Vrms

THD, at 1 kHz, MBW = 22 kHz

•  MIC input to master A L/R outputs, +10 dBu, typical < 0.015%
•  MIC input to speaker   output < 0.15%
• DIM 30, MIC input to speaker  output, 3.15 kHz, 15 kHz < 0.05%
• IMD-SMPTE, MIC input to speaker  outputs, 60 Hz, 7 kHz < 0.15%

Frequency response, -3 dB, ref. 1 kHz

• Any input to any Mixer  output 15–22000 Hz
• Any input to Speaker   outpu 15–22000 Hz

Crosstalk, 1 kHz

• Amplifier Ch1/Ch2 < -85 dB
• Channel to channel < -78 dB
• Microphone mute switch attenuation > 100 dB
• Channel VOL and FX/AUX send attenuation > 85 dB
• CMRR, MIC input, 1 kHz > 80 dB

Input sensitivity, all level controls in max. position

•  MIC -65 dBu (435 µV)
•  LINE (mono) -45 dBu (4.35 mV)
•  LINE (stereo) HI: -27 dBu (34.6 mV), LO: -11 dBu (218 mV)
•  CD (stereo) -27 dBu (34.6 mV)

Max. level, mixing desk, input VOL down, output VOL up

•  MIC inputs, GAIN at min. position +11 dBu
•  Mono line inputs, GAIN at min. position +30 dBu
•  Stereo line inputs +26 dBu
•  PHONES output +21 dBu
•  MASTER A, B, AUX outputs +11 dBu

Input impedances

•  MIC 2 kΩ
• CD 10 kΩ
• All other inputs > 15 kΩ

Output impedances

•  PHONES 47 Ω
• All other outputs  (impedance balanced) 150 Ω
• Noise, channel inputs to MASTER A L/R outputs, MBW = 22 kHz, A-weighted
•  MASTER VOLUME down -99 dBu
•  MASTER VOLUME center, all channel volume down -90 dBu
•  MASTER VOLUME center, all channel volume center -85 dBu
• Signal-to-noise ratio, power amplifier, A-weighted, 450 W, 4  Ω 104 dB
• Output stage topology, amplifier Class D

Equalization

•  Low shelving filter ±15 dB / 60 H
•  Mid peak filter ±12 dB / 2.4 kHz
• High shelving filter ±15 dB / 12 kHz
• Master EQ 7-band (63, 160,  400, 1k, 2.5k, 6k, 12k Hz) ±10 dB / Q = 1.5 

Filter

•  Low-cut filter, microphone  processing (switchable)   80 Hz, 18 dB/oct. or 150 Hz,12 dB/oct.
•  Low-cut filter, amplifier  (engaged in Direct Drive  mode) 50 Hz or 70 Hz, 18 dB/oct.
•  Speaker processing LPN, switchable
• Delay MASTER B, selectable 0–145 ms (0–50 m)

Effects

• Type Stereo 24/48-bit multi effects  processor
• Effect presets 32 factory presets, user editable
• Remote control Footswitch
• Display 128 x 64 pixels, LCD

Audio player (USB at front panel)

•  Switching mode power  supply (µC controlled) FAT 32
•  Supported audio file   formats MP3, WAV
•  Interface USB2.0, female type A
•  USB power supply, max.  rated current (short  circuit proof) 5 V, 500 mA

Digital audio interface (USB at rear panel)

•  Channels 2 in, 2 out
•  AD/DA conversion 16-bit, delta-sigma
•  Sampling rate 32/44.1/48 kHz
•  PC interface USB2.0, female type B

Protection

•  MASTER A, B, AUX  outputs Adjustable peak limiters, -10 –  +11 dBu
•  Amplifier Audio limiters, high temperature,  DC, HF, short circuit, peak  current limiters, turn-on delay,  back EMF
• Switching mode power
• supply (µC controlled) Inrush current limiters, mains
• over/undervoltage, mains over
• current, high temperature
• Cooling Continuous speed controlled fan
• Phantom power, switchable 48 V DC
• AC power input 100–240 V AC, 50–60 Hz
• Power consumption, at 1/8
• maximum output power, 4 Ω 180 W
• Safety class I
• Operating temperature 5° to 40° C (40° to 105° F)
• Product dimensions (Width x  Height x Depth) 395 x 244 x 241 mm
• Rack-mount: 483 x 223 x310.3 mm (7 HU)
• Net weight 4.9 kg  Shipping weight 6.4 kg