Q Acoustics Concept 500 Tower Speaker 200w x 2 Pair - Black
To create a stereo soundstage which gives as good an impression of width, depth and height as that found in a live performance requires high quality drive units, a well designed crossover and an accurately constructed cabinet. To achieve this, Q Acoustics formed a truly talented team with many years of experience in the design, engineering and manufacture of world-class loudspeakers. A combination that resulted in a state-of-the-art loudspeaker worthy of any high-end system.
2-year manufacturer's warranty
- Frequency Response: 41 Hz - 30 kHz
- Average Impedance: 6 Ω
- Minimum Impedance: 3.7 Ω
- Recommended Power: 25 - 200 W
- Distortion (120 Hz - 20 kHz): 0.2 %
- Crossover Frequency: 2.5 kHz
- Mid Bass / Driver: 2 x 6.5"
- High Frequency Unit: 1.1"
- Size (WxHxD): 15.74" x 45.27" x 13.77"
- Weight: 42 kg
- Links are provided to adjust the high frequency: + or - 0.5 dB.
- 2 x Concept 500 Floorstanding Speakers
- 2 x Jumpers
- 2 x Cleaning Cloth
- 8 x Ball End Feet
- 8 x Spike Feet
- 2 x Two Part Foam Bung
- 1 x Owners Manual
Benefits of Q Acoustics Concept 500 Floorstanding Speaker (Pair):
Great care has been taken in both the design of the crossover and the selection of high grade components, to introduce virtually zero noise and distortion. The 4th order Linkwitz-Riley topology which gives an excellent response both on and off-axis.
P2P Cabinet Bracing
A method known as P2P (Point to Point) bracing, supports the parts of the cabinet that need to be stiffened to deal with low frequency panel vibrations.
Constructed in three separate layers and filled under pressure with a non-setting gel, this damps the cabinet walls and converts higher-frequency vibrations into heat.
Terminals and Rear Access Panel
The rear access panel has been constructed to maintain the integrity of the Dual Gelcore cabinet. The Concept 500 is equipped for bi-wiring or bi-amping with terminals which can accept bare wires, spades or 4mm banana plugs.
High Frequency Driver
Mechanically decoupled mounting which effectively isolates the HF driver and speaker cabinet from reciprocal vibrations that would otherwise be transmitted between them.
Tall loudspeakers tend to suffer from resonances caused by un wanting pressure gradients. Specifically designed Helmholtz Pressure Equalisers *HPE) balance out these pressure irregularities.
The cast aluminium base of the Concept 500 is designed without large flat areas or additional adornments to discourage unwanted acoustic reflections. The resulting elegant design is underpinned with a choice of carefully engineered feet to immovably couple the loudspeaker to any surface.