Bose PowerShare PS404D - Adaptable Power Amplifier

OUR INNOVATIONS. YOUR EMOTIONS
About the PowerShare PS404D Adaptable Power Amplifier
Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications. This means you can distribute the total 400 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.
Product Highlights:
Features:
PowerShare Technology
Load-independent Outputs
Integrated Dante Audio Networking
Dual Feedback Loop System
ControlSpace Networking
Integrated Loudspeaker Processing
Auto-standby
Applications
- Performing arts venues
- Places of worship
- Conference centers
- Retail stores
- Restaurants and bars
- Hospitality venues
Warranty: 5-years
Specifications:
Performance:
-
Amplifier Power: 4 x 100 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
-
Maximum Power per Channel: 400 W @ 4-8 Ω, 70/100V
-
Gain (Low-Z mode): 30.2 dB
-
Gain (70V mode): 35.0 dB
-
Gain (100V mode): 38.0 dB
Frequency Response: 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk): > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
Signal to Noise Ratio: 100 dB (at rated power, A-weighted)
Audio Inputs:
-
Input Channels:
-
Analog: 4 balanced
-
AmpLink: 4 digital
-
Connectors:
-
Analog: 12-pin Euroblock
-
AmpLink: RJ-45 (primary)
Input Impedance: 20 kΩ
Maximum Input Level: 20 dBu (at 12 dBu sensitivity setting)
Sensitivity: 4 / 12 dBu (low / high sensitivity)
Audio Outputs:
-
Outputs: 4
-
Connectors: 8-pin inverted Euroblock
Integrated DSP:
-
A/D and D/A Converters: 24-bit/48 kHz
-
Processing Functions: Matrix mixer, loudspeaker EQ, 9-band PEQ, Vpeak/Vrms limiters, delay, band-pass, mute, output polarity inversion
-
Audio Latency: < 1 ms (Analog input to analog loudspeaker output)
Indicators and Controls:
-
Power LED: Solid green - Solid green: Power is on. Blinking green: The unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.
-
Input Signal LED: Green - Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.
-
Output Limit LED: Amber -Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
-
Front Panel Control: Power On/Off
-
Rear Panel Controls: Output attenuators
Physical:
-
Dimensions: Width - 44 mm x 483 mm x 414 mm (1.7 in x 19.0 in x 16.3 in)
-
Net Weight: 6.4 kg (14.1 lb)
-
Cooling System: Microprocessor controlled, variable speed fans, left to right airflow