JBL A120P Powered Subwoofer 12" 500w - For Home Theater System
Front Row Seats To The Concert, Now Available !
Add impact to movies and music
When you add a sub to your home theater, it would be like a missing puzzle piece fell into place. And yoyou don't just hear the difference, you'll felt it. The JBL Stage A120P delivers that crucial low-end rumble with a powerful Standard 250-watt amplifier and a 12" woofer made out of stiff polycellulose for deep bass. The cabinet is built to be as rigid and resonance-free as possible, with two tuned rear ports for enhanced low-frequency output.
Get the most out of your sub
Since bass frequencies are omnidirectional, you have flexibility where your subwoofer goes. Placing your subwoofer near a wall will generally result in more bass. Placement near a corner where three room boundaries come together will get you even more
Most people put their sub in the front of the room so that it’s easier to connect it to their home theater receiver
- Frequency response: 32-150 Hz
- 250-watt RMS amplifier (500 watts peak power)
- 12" polycellulose woofer
- Bass-reflex design with rear-firing tuned ports
- Rear-mounted volume, crossover, phase, and power controls
- Continuously variable low-pass 50-150 Hz crossover
- Phase switch to acoustically match the subwoofer's output to your main speakers
- Main power on/off switch plus auto standby/on mode
- Line-level/LFE input
- Detachable power cord
- Removable grille
Features & Specs
- Enclosure Bass reflex
- Video Shielded No
- Woofer Size (inches) 12
- Woofer Composition Polycellulose
- Firing Direction Front
- Preamp-Level Inputs Yes
- Speaker-Level Outputs No
- Low-Pass Crossover Freq 50-150Hz
- High-Pass Crossover Freq N/A
- Phase Switch Yes
- Amplifier Output (watts) 250
- Frequency Response 32-150 Hz
- Height (inches) 16-5/16
- Width (inches) 15-7/16
- Depth (inches) 18-11/16
- Warranty: 1 Year
What's in the Box:
- Powered subwoofer
- 6' AC power cord
- 4 Spike feet
- Owner's Manual
- Warranty Card
- Important Safety Instructions
12" Woofer: The JBL Stage Sub 120P features a front-firing 12" high-output polycellulose woofer with rubber surround for powerful low-frequency performance that makes your movie & music soundtracks come alive.
250 Watt Amp: The 12" woofer is powered by a built-in 250-watt (RMS)/500-watt (Peak) amplifier for dynamic and accurate bass performance.
Bass Reflex Cabinet: The 10" woofer is housed in a bass reflex cabinet with dual rear-firing ports which optimize airflow, while minimizing port turbulence and audible distortion in the bass response. The cabinet features MDF construction and is covered in a black vinyl. It also includes a detachable cloth grille.
Controls: The JBL Stage Sub 120P offers Volume, Crossover, and Phase controls to fine-tune the powered subwoofer to your speaker system and room.
Volume: Use this control to adjust the powered subwoofer's volume in relation to the volume level of the rest of your speaker system. Once you have balanced the subwoofer's volume with that of the other speakers in your system, you shouldn't have to change the volume control setting.
Crossover: The variable 24dB/octave Crossover adjusts the subwoofer's built-in low-pass filter crossover between 50Hz and 150Hz. The higher you set the variable Crossover, the higher in frequency the subwoofer will operate and the more its bass will "overlap" that of the speakers. This adjustment helps achieve a smooth transition of bass frequencies between the subwoofer and the speakers for a variety of different rooms and subwoofer locations
Phase: The Phase switch (Normal or Reverse) determines whether the woofer's piston-like action moves in-and-out in phase with the main speakers. If the subwoofer were to play out of phase with the main speakers, the sound waves from the main speakers could partially cancel out the sound waves from the subwoofer, reducing bass performance and sonic impact. This phenomenon depends in part on the placement of all the speakers relative to the listening position and to each other in the room.
LFE/RCA Input: The JBL Stage Sub 120P is fitted with a mono-RCA/LFE input for connecting your home theater or stereo receiver. If your receiver is equipped with a dedicated LFE output, make sure to turn the powered sub's variable crossover fully clockwise to bypass the subwoofer's internal crossover in order to use your receiver's built-in crossover; you will need a mono-subwoofer cable (sold separately). If your receiver is not equipped with dedicated LFE output, but does offer a stereo pre-out, you will need a RCA Y-adapter in addition to a mono-subwoofer cable (both sold separately); in this case you will use the powered sub's built-in variable crossover, which can be set between 50Hz and 150Hz.
Power Modes: In "Auto" mode, the powered sub will automatically turn on when an audio signal is detected and will return to the standby mode when no audio signal is detected after approximately 10 minutes. Setting the Power switch to "On" keeps the subwoofer powered until the Power switch is turned "Off". The subwoofer's LED will glow blue when the subwoofer is on and will glow red when the subwoofer is in standby.
Rubber or Spike Feet: The JBL powered subwoofer features four integrated rubber feet for use on hardwood, tile, and laminate flooring. Four spike feet are also included for rug and carpet flooring. The spikes screw into the bottom of the rubber feet and add approximately 0.5" to the overall height of the subwoofer. The rubber feet are not removable.
Placement: The performance of a subwoofer is directly related to its placement in the listening room and its physical position relative to the other speakers in the system. While it is true that in general our ears do not hear directional sounds at the low frequencies where subwoofers operate, when installing a subwoofer within the limited confines of a room, the reflections, standing waves and absorptions generated within the room will strongly influence the performance of any subwoofer system. As a result, the specific location of the subwoofer in the room does become important to the amount and quality of bass that is produced.
Placing the subwoofer next to a wall generally will increase the amount of bass in the room; placing it in a corner generally will maximize amount of bass in the room. However, corner placement can also increase the destructive effect of standing waves on bass performance. This effect can vary depending on the listening position - some listening positions may yield very good results while others may have far too much (or too little) bass at certain frequencies.
In many rooms, placing the subwoofer along the same plane as the left and right speakers can produce the best integration between the sound of the subwoofer and that of the left and right speakers. In some rooms, the best performance could even result from placing the subwoofer behind the listening position.
It is strongly recommend that you experiment with placement before choosing a final location for your subwoofer. One way you can determine the best location for the subwoofer is by temporarily placing it in the listening position and playing music with strong bass content.
Combine the A120P with other JBL Stage speakers to complete your home theater.