The new Jamo Studio 8 series of loudspeakers has been engineered and designed to complement and seamlessly blend in today's modern environments and fashionable living spaces.
Contemporary material and finish choices accentuate the clean, minimalist lines of this European design, while the compact cabinet architecture is an ideal solution for today's urban living environments.
Two-Way Tower Speaker:
The S 807 floorstanding speaker features a 1" soft-dome tweeter for smooth, refined high frequencies, and two 5" aluminized polyfiber woofers for balanced, musical low end.
The integrated WaveGuide focuses the high frequency sound for dynamic, true-to-life reproduction, while the front-firing slot port allows for better low frequency extension and flexible placement.
Compact Enclosure w/ Wood Accents:
The S 807 is specifically designed and engineered to provide exceptional output and balanced, full sound in almost any application despite it's small cabinet size.
Wood accents give the speaker cabinet a handcrafted, natural look.
Magnetic Grille:
The S 807 comes with fully magnetic grilles (no mounting holes or push pins) for a clean, minimalistic front-baffle design, while the large woven linen grille cloth features a heavy texture which finishes off the loudspeaker's modern look.
Binding Post Terminals:
Each floorstanding loudspeaker is equipped with two sets of binding-post speaker terminals - one set for the S 807's tweeter & woofers, and the other set for when using the optional Dolby Atmos Elevation speakers from Jamo (sold separately).
The terminals labeled "Main" will connect to your receiver's Front or Rear channel speaker outputs (depending on how you are using the bookshelf speakers).
The terminal's labeled "Height" will connect to receiver's Height/Dolby Atmos channel speaker outputs (make sure you have your receiver's amplifier configured for Dolby Atmos).
These binding-post terminals will accept bare wire (up to 10AWG), pin-connectors, spade-lugs, and banana plugs (single only).
Applications:
The Jamo Studio 8 Series S 807 floorstanding loudspeakers can be used for the front or rear channels in a home theater system, or standing alone in a strictly two-channel stereo system.
Placement Options:
As front channels in a home theater setup or as a 2ch speaker system, the S 807 should be positioned so the loudspeakers create an equidistant triangle between the speakers and your main listening position.
They should be positioned no less than 6' apart.
As rear speakers in a home theater setup, the speakers should be positioned directly to the left and right of your main listening position, or just behind the main listening position at a 20° angle.
Mounting Options:
Each floorstanding speaker comes with four mounting feet which will need to screwed into the bottom of the loudspeaker's enclosure.
There are indentions on the bottom of the cabinet to indicate where the feet mount, but there are no pre-drilled holes.
Self-tapping screws are included to secure the feet to the speakers.
Each mounting foot consists of a metal plate and rubber pad to protect your floors.
